ARCHER 276-1715 Dual Bifet Op Amplifier

( Brand: Archer ), ( Manufacturer Part Number: 276-1715 ), ( Part Type: Amplifier ), ( Age Level: 17 Years Up )

Review ARCHER Dual Bifet Op Amp

The **Archer 276-1715 Dual BIFET Operational Amplifier** is a high-performance, precision analog signal conditioning component designed for demanding applications requiring exceptional speed, low noise, and broad input/output flexibility. Part of Archer s advanced BIFET (Bipolar Field-Effect Transistor) amplifier family, this dual op amp module combines the best characteristics of both bipolar junction transistors (BJTs) and MOSFETs, delivering superior performance across a wide range of operating conditions. With a slew rate of up to **15 V/ s** and a bandwidth of **10 MHz**, the 276-1715 excels in high-speed signal processing, making it ideal for applications such as active filters, data acquisition systems, and high-frequency instrumentation. Its **rail-to-rail input and output stages** ensure maximum dynamic range, allowing the amplifier to operate efficiently even when driven close to the supply rails, typically 5V to 15V, with a single-supply capability down to 2.5V, depending on the configuration. The device features **low input bias current (typically 20 pA)** and **ultra-low offset voltage (as low as 1 mV)**, ensuring high precision in critical measurement and control circuits. Additionally, its **wide common-mode input range** (extending nearly to the supply rails) and **high input impedance (10 )** make it well-suited for interfacing with high-impedance sensors or delicate signals without degradation. The 276-1715 is housed in a **14-pin DIP or SOIC package**, providing a compact yet robust solution for embedded systems, test equipment, and industrial automation. Its **low power consumption** (typically 2.5 mA per amplifier) and **high output drive capability (up to 50 mA)** further enhance its versatility, allowing designers to implement efficient, high-performance signal conditioning without compromising on performance. Whether used in precision analog computing, audio processing, or high-speed data conversion, the Archer 276-1715 delivers a reliable, high-speed dual op amp solution that bridges the gap between bipolar and MOSFET technologies for unmatched flexibility and performance.

**Pros and Cons of buying a Archer 276-1715 Dual Bipolar Operational Amplifier (Op Amp)**

### **Pros**

1. **Dual Configuration** The 276-1715 provides two independent op amps in a single package, making it cost-effective for circuits requiring multiple amplifiers without needing separate components.

2. **Bipolar Operation** Suitable for both positive and negative supply voltages, offering flexibility in power supply configurations (e.g., dual-supply or single-supply with offset adjustments).

3. **Low Cost** As a generic or commodity op amp, it is significantly cheaper than high-performance or precision amplifiers, making it ideal for basic signal processing, amplification, or general-purpose applications.

4. **Wide Availability** Easily sourced from distributors (e.g., Digi-Key, Mouser, Amazon) and often stocked in bulk, reducing lead times.

5. **Decent Performance for Basic Use** While not a high-precision or high-speed op amp, it performs adequately for low-to-moderate frequency applications (e.g., audio buffering, sensor signal conditioning, simple filters).

6. **Simple Design** No complex biasing or external components are typically required for basic configurations, reducing prototyping effort.

7. **Compatibility with Common Prototyping** Works well with breadboards, perfboards, and standard PCB layouts due to its TO-99 or similar package (depending on variant).

### **Cons**

1. **Limited Performance Specifications** Compared to high-end op amps (e.g., OPAxx series, LT10xx), it has lower gain-bandwidth product, slew rate, and input impedance, which may limit its use in high-frequency or precision applications.

2. **No Guaranteed Long-Term Stability** Generic op amps may lack datasheet-backed stability guarantees for complex feedback networks (e.g., oscillators, active filters), risking unintended oscillations.

3. **No Built-in Protection Features** Lacks internal protection against reverse polarity, excessive voltage, or thermal overload, which could damage the component or circuit in harsh environments.

4. **Temperature Drift** Performance may degrade in extreme temperatures, affecting accuracy in applications requiring stable gain or offset over wide temperature ranges.

5. **No Rail-to-Rail Input/Output** Unlike modern rail-to-rail op amps, it may not fully utilize the supply voltage range, limiting output swing and input common-mode range.

6. **Potential for Variability** Since it is a generic part, individual units may exhibit slight variations in parameters (e.g., offset voltage, gain), requiring trimming or compensation in precision circuits.

7. **No Low-Noise or High-Impedance Inputs** Not suitable for applications requiring ultra-low noise (e.g., audio preamps) or high-input impedance (e.g., ECG sensors).

### **Conclusion**

The Archer 276-1715 dual bipolar op amp is a **practical and economical choice for basic amplification, signal conditioning, or simple analog circuits** where cost and availability are priorities over performance. It excels in low-cost prototyping, educational projects, or non-critical applications where performance margins are forgiving. However, it is **not recommended for high-precision, high-frequency, or noise-sensitive applications** where stability, speed, or accuracy are critical. For such use cases, investing in a higher-quality op amp (e.g., LM358 for general use, OPA2134 for precision, or LT1028 for high-speed) would be advisable.

### **Recommendation**

- You need a dual op amp for a low-cost, non-critical circuit (e.g., a simple amplifier, sensor interface, or basic filter).

- You are working on a student project, hobbyist build, or prototype where performance is secondary to affordability.

- The application operates at low frequencies (e.g.,

- You require high gain-bandwidth, low noise, or rail-to-rail performance (e.g., audio equipment, data acquisition, or precision measurements).

- Your circuit involves complex feedback networks (e.g., active filters, oscillators) where stability is critical.

- You need long-term reliability in harsh environments (e.g., automotive, industrial) without additional safeguards.

- Cost is not a limiting factor, and you can justify spending slightly more on a better-performing op amp.

For most **serious analog design work**, prioritize op amps with well-documented stability, performance specs, and protection features. The Archer 276-1715 is a **good "starter" or "backup" component** but should not be relied upon for mission-critical applications.

Details:

Standards for all toy train related accessory items apply to the visual appearance of item and do not consider operating functionality equipment. Has inner liners. Model Number: 276-1715. We'll do our absolute best to make you happy.

Condition: Factory New C-9All original; unused; factory rubs and evidence of handling, shipping test run. Economy Shipping. Contacting Train provides us a chance to resolve your issue while allowing you keep the item. Train Product Id: 12808893.

Manufacturer: Archer. Operational Status: Functional This item is brand new from the factory. This is an Archer 276-1715 Dual Bifet OP AMP.

part #: 2761715 prices

• $10.99-$19.99

specifications oscaletraini:

• brand: Archer
• mpn: 276-1715
• part type: Amplifier
• age level: 17 Years Up

seller oscaletraini:

• city: Flowery Branch, Georgia
• rating: 99.8%
• # reviews: 754976

offer oscaletraini:

• availability: In Stock
• quantity: 1
• sold: 0
• started: May 6, 2026
• options: Ship-to-home

payments oscaletraini:

• wallet: Google-pay
• credit card: Visa
• other

general oscaletraini:

• Railroads Trains > Parts Accessories > Parts Spares
• condition: Used

shipping oscaletraini:

• service: Economy, Standard
• cost: $7.98
• transit: 3-8 Days
• type: Fixed
• class: Economy, Standard

returns oscaletraini:

• time: 30 Days
• method: Money back
• policy: Returns Accepted
• paid by: Seller